EAM is known for innovative magnet designs – here is another great example: The Challenge: Produce an inner and outer ring assembly for use in an auxiliary HVAC power unit for trucks. The power unit incorporates a J1939 bus and new operating modes aimed at saving battery power and fuel. An integrated pump circulates heated coolant
Here’s a great example of an automotive related linear motor application. The magnet in this case is a multi-pole injection molded magnet made from a hybrid neodymium and ferrite blend. The magnet is injection molded directly to a zinc plated steel hub – no gluing or assembly required. The hub is knurled to promote the
Technology that other vendors couldn’t supply was developed by EAM. Here’s what we did to provide the solution… They had designed a magnetically controlled valve for a line of machines that regulate the flow of anesthetic gas delivered to each patient. Obviously, the performance of these valves is extremely critical. They are subject to stringent
Technology that other vendors couldn’t supply was developed by EAM. Here’s what we did to provide the solution… Magnets are used in countless modern “stirring” applications where contamination is a concern. The ability to create movement without any physical contacts – using only a magnetic field to couple the stirrer to the motor – guarantees
Technology that other vendors couldn’t supply was developed by EAM. Here’s what we did to provide the solution… Injection molding technology has changed the way magnets are used and implemented in many applications. This particular customer had a very specific need, and looked to EAM to provide a 21st century solution. The Problem: A company that
Technology that other vendors couldn’t supply was developed by EAM. Here’s what we did to provide the solution… Medical applications can be some of the most demanding magnet design challenges. Precision and consistency are of primary importance when dealing with systems that will be counted on to perform when someone’s life is on the line.
Technology that other vendors couldn’t supply was developed by EAM. Here’s what we did to provide the solution… A major manufacturer of health care products and emergency alert systems contacted EAM to assist them with the development of a new emergency call button. They wanted this call button to work magnetically, eliminating the need for
Corporate Location
Eneflux Armtek Magnetics, Inc.
6 Platinum Court
Medford, NY 11763 USA
Manufacturing Location:
Eneflux Armtek Magnetics, Inc.
1775 Stout Drive, Unit G
Warminster, PA 18974 USA
©COPYRIGHT 2024
