Great Magnet Design – Contact Free Ring Assembly

2023-06-13T18:24:16+00:00Automotive, Injection Molded Neodymium, Magnetic Assemblies|

EAM is known for innovative magnet designs – here is another great example: The Challenge: Produce an inner and outer ring assembly for use in an auxiliary HVAC power unit for trucks. The power unit incorporates a J1939 bus and new operating modes aimed at saving battery power and fuel.  An integrated pump circulates heated coolant

Innovative Hybrid Motor Magnet

2022-12-01T23:03:35+00:00Automotive, Injection Molded Parts, Magnetic Assemblies|

Here’s a great example of an automotive related linear motor application. The magnet in this case is a multi-pole injection molded magnet made from a hybrid neodymium and ferrite blend. The magnet is injection molded directly to a zinc plated steel hub – no gluing or assembly required. The hub is knurled to promote the

Positioning Sensor Magnet for Steering Applications

2021-10-13T18:12:55+00:00Automotive, Injection Molded Parts|

Designed to sense exact position in steering applications. Injection molded neodymium magnet and aluminum bushing over-molded with polypropylene casing. Magnetized radially with 4 poles. Multi-step molding process produces one cohesive piece, eliminating the need for additional assembly. Have a specific magnet specification for your project? Contact EAM today for your magnet needs.

After-Market Magnetic ‘Break-Away’ Oil Filter

2022-01-07T21:35:41+00:00Automotive, Injection Molded Neodymium, Magnetic Assemblies|

Technology that other vendors couldn’t supply was developed by EAM. Here’s what we did to provide the solution… Injection molding technology has changed the way magnets are used and implemented in many applications. This particular customer had a very specific need, and looked to EAM to provide a 21st century solution. The Problem: A company that

Tier 1 Commercial Automotive Supplier

2022-01-07T21:29:06+00:00Automotive, Ceramic / Sintered Hard Ferrite Parts|

Technology that other vendors couldn’t supply was developed by EAM. Here’s what we did to provide the solution… Tier 1 automotive suppliers are under constant pressure from their high profile customers to improve their products and extend their warranties. In this case, a manufacturer of transmissions, brakes, and axles for commercial vehicles needed to cut

Go to Top